Pay in installments of $42.25 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 7 - Aug 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
9.0 Amp 5/8 in. Corded Drill/MixerThe Bosch GBM9 16 120 Volt 5 8 in. Corded Drill Mixer is a heavy duty drill that doubles as a material mixer, from paint to plaster and more. This drill mixer has variable speed control and it has both forward and reverse drilling at 0 700 no load RPM for applications in wood or metal. The all ball bearing motor and precision cut steel gears deliver plenty of power for high torque mixing jobs. In mixing, higher speed is best for materials with low
The Bosch GBM9-16 120-Volt 5/8 in. Corded Drill/Mixer is a heavy-duty drill that doubles as a material mixer, from paint to plaster and more. This drill/mixer has variable speed control and it has both forward and reverse drilling at 0-700 no-load RPM for applications in wood or metal. The all-ball bearing motor and precision-cut steel gears deliver plenty of power for high-torque mixing jobs. In mixing, higher speed is best for materials with low viscosity such as paint or sealing compounds. Lower speed, higher torque mixing works for mortar or epoxy resin. This drill/mixer features a 360° rotatable D handle, for maximum comfort during all-day applications. It diminishes vibration while allowing the user to adjust to the desired position.- Heavy-duty keyed chuck supports a wide variety of drilling and mixing accessories
- Ergonomic handle with soft grip for increased comfort
- Magnesium front housing for increased durability
- Extra-long 8 ft. rubber cord with 3-prong ground plug offers greater versatility on the jobsite
- 2-finger trigger design and lock-on button for ease of operation
- Includes: auxiliary handle and chuck key
Features
| Item Weight | 9.420 |
| Color Family | Blue |
| Drill/ Driver Type | Drill/ Driver |
| Amperage (amps) | 9 A |
| Chuck Size | 5/8 In. |
| Returnable | 180-Day |
| Cordless/ Corded | Corded |
| Tools Product Type | Power Tool |
| Maximum Speed (RPM) | 700 RPM |
| Condition | New |
| Included | Second Handle Included |
| Corded Tool Type | Drill/Driver |
| Power Tool Features | Variable Speed |
| Product Weight (lb.) | 9.42 lb |
| Chuck Type | Keyed |
| Cord Length (ft.) | 8 |
| Product Width (in.) | 11.750 in |
| Product Depth (in.) | 15.25 in |
| Product Height (in.) | 4.25 in |
| Certifications and Listings | UL Certified |
| Manufacturer Warranty | Limited 1 Year |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 28 reviews
Sort
Product Reviews
★★★★★ 5
BUY THIS ONE!
Model: NewSLS50_52
This is one of the good ones. There are other brands just as good, and manny brands are worse, but this handles well, rolls down easily, doesn't come off at all easily, and adapts to dips and curves like a champ.
Appropriately heavy and dead, I'm happy with the way it smothers panel resonances and even at muffling direct sound, like a big hand over my Uncle Harry's eternally noisy mouth. You can rip the foil but you have to work hard at doing that.
Remember to buy a brayer; you can roll overlaps nice and thin. Also remember to pre-wipe the sheet metal with a decent solvent like acetone or Stoddard/Varsol. It should last forever.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2025
★★★★★ 5
Good stuff, but watch the temp
Model: NewSLS50_52
I used this in my single cab pickup truck (89 ford.) It only took half the box (10 sheets or 25 square feet) to do the floors, but I bought the big box because I plan to do the doors, back wall, and maybe the roof as well. One thing I learned is that the temperature matters when you’re doing the installation. It was around 55F when I started in the evening, and when it dipped down into the 40s the sheets would not stick to the metal, and were hard to compress with the roller. That’s why I ended up only doing the floors and not any vertical surfaces; i will have to wait for a nice hot day. The other thing is that the foil layer on top is razor sharp at the edges, definitely wear gloves! I didn’t notice until after but I have little papercuts all over my fingers. Aside from those things, the install was easy and straightforward. The sheets cut easily with scissors, and any goo that ends up on your hands or scissors can be cleaned up with acetone (nail polish remover), or lacquer thinner. I would use this stuff again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 16, 2023
★★★★★ 5
Very efficient!
Model: NewSLS50_52
Amazing the difference it makes on dumping the noise. Very easy to install. Pell and stick literally! Great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 23, 2025
★★★★★ 5
Supports DP Alt + Power Delivery from one source
This is one of the very, very few USB-C hubs out there that successfully pushes DisplayPort Alt and 100w PD functionality from one source cable to one device. My monitor has a USB-C DP alt port that also pushes 95w PD and this hub successfully pushes both of those to my laptop, phone, and android handheld console. The marketing material says something about USB PD cannot work with DP alt, but it seems to be working fine for me so who knows. With this little hub in-between the link from the monitor to the device, I can now add a USB ethernet adapter and game controller, and I only ever have to plug one USB-C cable into my device (and I am using a USB4 extension cable with no issues as well) and it all works perfectly!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2026
★★★★★ 5
Supports Reverse Charging a Laptop on Monitors with USB-C PD!
This adapter is unique in that it supports reverse charging + video on the same port. I use this with an LG monitor (60W PD) and an M1 Pro Mac.
At first, I had connectivity issues: hub was disconnecting and reconnecting every few seconds. I followed advice to update the firmware on the hub, but that didn't solve the issue. Turns out, my monitor also needed a firmware update. Once I updated the monitor firmware, it stabilized and has been working great ever since.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 4, 2025
recommand products
Giorik 700 Series 400mm wide Ribbed Mild Steel Gas Frytop FRG72TFT.N
2733.50
14K White Gold Lab Grown VS/SI+ G+ Diamond Petite Engagement Ring
422.00
14k Rose Gold 1 Ct. Lab Grown Diamond VS/SI+ G+ Channel Set Eternity Band Ring
526.00
Giorik Traditional 650mm Salamander SRE1210T
2271.50
14k White Gold 1/4 Ct. Lab Grown Diamond VS/SI+ G+ December Birthstone Blue Topaz Halo Ring
714.00