Schluter Systems SCHIENE 0.375-in W x 98.5-in L Satin Anodized Aluminum L-Angle Tile Edge TrimSatin anodized aluminum tile edge trim, 3 8 in x 98 1 2 in Schluter SCHIENE is a slim, L angle edging profile that protects exposed tile edges and creates clean, same height transitions to adjacent floor coverings. Made of satin anodized aluminum with an 87 slope, it transfers point loads and resists chipping while delivering a discreet, modern reveal. Key Features: Edge Protection: 87 sloped profile shields tile edges from chipping and damage Clean

Satin anodized aluminum tile edge trim, 3/8 in x 98-1/2 in

Schluter SCHIENE is a slim, L-angle edging profile that protects exposed tile edges and creates clean, same-height transitions to adjacent floor coverings. Made of satin anodized aluminum with an 87° slope, it transfers point loads and resists chipping while delivering a discreet, modern reveal.

---

Key Features:

• Edge Protection: 87° sloped profile shields tile edges from chipping and damage
• Clean Transitions: Approximately 1/8 in visible surface for subtle, same-height floor transitions
• Durable Build: Satin anodized aluminum resists wear in residential and light commercial floors
• Curved Applications: Optional radius-perforated anchoring leg allows forming gentle curves
• Long Length: 98.5 in strip reduces seams along large transitions

Please check the Product Data Sheet Here

---

Specifications Table:

Specification	Details
Profile name	SCHIENE
Material	Satin anodized aluminum
Profile type	L-angle edging profile
Length	98.5 in (approx. 2.5 m)
Width / Height	0.375 in (3/8 in; 10 mm nominal)
Visible surface	~1/8 in (3 mm)
Slope	87° to transfer point loads and protect tile edges
Application	Same-height transitions between tile and adjacent floor coverings; edge protection
Curved installation	Available with radius-perforated anchoring leg to form curves
Typical use environment	Interior floors; choose stainless steel for high-moisture/chemical exposure

---

Frequently Asked Questions (FAQ):

Q: What tile thickness does 0.375 in SCHIENE fit?
A: A 3/8 in (10 mm) profile is intended for tile installations of approximately the same thickness; select the profile height to match your tile.

---

Q: Can SCHIENE be used in curved transitions?
A: Yes. Versions with a radius-perforated anchoring leg can be shaped to form curves.

---

Q: Is this suitable for wet areas?
A: Aluminum profiles are generally for interior, dry environments; consider stainless steel SCHIENE for higher moisture or chemical exposure.

---

Q: How is it installed?
A: Embed the perforated anchoring leg in thin-set mortar under the tile, align the reveal with the tile edge, and grout flush with the profile.

---

Q: What is the visible reveal width?
A: Approximately 1/8 in (3 mm) for a discreet look.

---

A razor-thin line that elevates every transition

SCHIENE’s satin aluminum edge draws a crisp, architectural line that refines the meeting of tile and carpet. The whisper-thin reveal delivers polish without distraction, letting materials take center stage. Use it to trace gentle curves across a floor for a bespoke, gallery-like finish. It’s the quiet luxury detail that makes a room feel impeccably tailored.

---

Finish your tile project with SCHIENE for a clean, protected transition that looks custom-built.