SKU: 75651876637

Olaplex Bond Multiplier and Bond Perfector Step 1 & 2 - 15ml / 30ml

Sale price$19.80 Regular price$22.00
Save 10%

Pay in installments of $5.50 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 6 - Aug 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Olaplex Bond Multiplier and Bond Perfector Step 1 & 2 - 15ml / 30mlOlaplex is the hair colour's holy grail.. Product will be shipped in our own sample size bottles. Each bottle will be tightly screwed in a child proof lidded bottle (push the lid down and unscrew to open) then sealed inside plastic pouch just in case to catch any drops should a lid somehow become loose. For hair that has been compromised chemically or thermally, this should be your first step. The Bond Multiplying System can be used as a reset button

Olaplex is the hair colour's holy grail..


Product will be shipped in our own sample size bottles. Each bottle will be tightly screwed in a child proof lidded bottle (push the lid down and unscrew to open) then sealed inside plastic pouch just in case to catch any drops should a lid somehow become loose.


For hair that has been compromised chemically or thermally, this should be your first step. The Bond Multiplying System can be used as a reset button for your client’s hair and by doing so allows you to rebuild the strength, structure and integrity to the point where a colour or chemical service would then be feasible once again. This treatment may be done before and/or after a chemical service and may be applied in the salon once a week or more. Compatible with all hair types from virgin to extremely compromised chemically treated hair. Note: This is our most popular service requested by clients and a great introduction to the Olaplex System. * When doing multiple lightening sessions, this service is recommended after every lightening process. Mix 1/2oz (15ml) of Olaplex No. 1 Bond Multiplier with 3oz (90ml) of water in a non-spraying applicator bottle. ( Do not use a spray bottle. ) Apply from roots to ends on dry or damp towel dried hair. (You may give a light shampoo to remove product buildup.) Saturate hair and comb through well. Leave on for 5 or more minutes. Without rinsing, apply a generous amount of Olaplex No. 2 Bond Perfector and comb through once. Leave on for a minimum of 10 or more minutes. Process longer than 10 minutes for extremely compromised hair. Rinse, shampoo, and condition. Apply any additional treatment at this time.


Olaplex Step 1 - 15ml


Pay special attention to the scoop size of the bleach powder you are using. Scoop sizes vary. The amount of Olaplex used depends on the amount of both developer and bleach powder combined. Can be used for foil highlights, Balayage, cream bleach, on the scalp lightener and colour and gloss.


Before installing dosage dispenser, shake lightly. Due to the dilution of Olaplex into your bleach, increase your developer one full volume. 10V to 20V, 20V to 30V, 30V to 40V. Do not increase for scalp bleach. Do not increase for a base colour. Use caution with heat.


Olaplex Step 2 - 30ml



Olaplex Step 2 bond perfector is not a conditioning treatment nor is it an activator or neutralizer. It uses the same active ingredient found in the bond multiplier step 1, however, developed as a cream form for ease of application and use in the Olaplex system. This second step is necessary with all services for the best results.


Rinse highlights or colour from hair. Do not shampoo.


Please note: Olaplex is not a magic wand. You can push envelope and process further and lift higher, but you cannot take dark and damaged hair to make it platinum blonde and healthy in 90 minutes.



Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 75651876637

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 28 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
ralversity
West Palm Beach, US
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
T
Verified Purchase
Talagand
West Palm Beach, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
S
Verified Purchase
Sami Jo
San Leandro, US
★★★★★ 5
Quick and pretty privacy screen
Color: Beige, Size: 4 Panel-67”
Relatively easy to assemble. Looks very nice at the nursing home of my friend and is sturdy. Unfortunately, aides place towels and sometimes clothes over it and it stands stable. The bamboo color is nice to look at. It is lightweight and can be moved easily!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
K
Verified Purchase
KMB
Cuba, US
★★★★★ 5
Good height, versatile.
Color: Brown, Size: 4 Panel-67”
Well made, nice style. Best indoors since it tends to blow over if outside.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2026
M
Verified Purchase
Michelle
Lexington, US
★★★★★ 3
Esthetically sound, materially flimsy
Color: Beige, Size: 4 Panel-67”
The item at first seemed okay and quality was good. But it’s a little flimsy and tips over frequently. I’m thinking of returning and replacing pretty soon.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026

recommand products