Pay in installments of $29.75 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 6 - Aug 11
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Happymodel Mobula8 2S Digital HD O3 Lite (No VTX and Camera) 85mm Micro FPV Whoop Drone - ELRS 2.4Here comes Mobula8 2S Digital HD FPV series with DJI O3 Ready (no VTX and Camera) New CrazyF405 ELRS flight controller, EX1103 KV11000 motors and Gemfan Hurricane 2023 tri blade propeller, which has excellent power performance and extremely smooth flight in HD Quality Video. Here is our recommended 2S 550mAh Battery that fits perfectly in this drone! This is the Happymodel Mobula8 2S Digital HD O3 Lite version : it's O3 Ready but it does not include
Here comes Mobula8 2S Digital HD FPV series with DJI O3 Ready (no VTX and Camera) New CrazyF405 ELRS flight controller, EX1103 KV11000 motors and Gemfan Hurricane 2023 tri-blade propeller, which has excellent power performance and extremely smooth flight in HD Quality Video.
Here is our recommended 2S 550mAh Battery that fits perfectly in this drone!
This is the Happymodel Mobula8 2S Digital HD O3 Lite version : it's O3 Ready but it does not include the O3 VTX and Camera.
Check out our Micro Whoop Drones, our entire Happymodel Products and The Digital BNF/PNP/RTF Collection.
Notice: DJI O3 air unit warranty service is undertaken by DJI according to their warranty policy, please noted. If you purchase this product you agree to this policy.
Features:
- Digital HD FPV experience
- New CrazyF405 ELRS HD flight controller
- Powerful and Smooth
- UART ExpressLRS receiver
- Built-in blackbox for Gyroflow and PID Tune
Specifications:
Motor
- Mode: EX1103 KV11000
- Configu-ration:9N12P
- Stator Diamter:11mm
- Stator Length:3mm
- Shaft Diameter:Φ1.5mm
- Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm
- Weight(g):3.8g
- No.of Cells(Lipo):1-2S
Propellers
- Weight:0.88g
- Material: PC
- Pitch:2.3inch
- Props Dia:52.17mm
- Center Thickness:5mm
- Center Hole Dia:1.5mm
Flight Controller
- MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
- GYRO Sensor: BMI270 (SPI connection)
- Mount hole size: 25.5mm*25.5mm
- Power supply: 1-2S battery input (DC 2.9V-8.7V)
- Built-in 12A(each) Blheli_S 4in1 ESC
- Built-in Serial ExpressLRS 2.4G
- Built-in BMP280 Barometer
- Built-in 8MBp blackbox
- Built-in voltage meter sensor , voltage meter scale 110
- Built-in current meter sensor , current meter scale 470
Onboard 4in1 ESC
- Power supply: 1-2S LiPo/LiPo HV
- Current: 12A continuous peak 15A (3 seconds)
- Support BLHeli_S Bluejay firmware
- Factory firmware: Bluejay ESC V0.19
- Firmware target: Z-H-30
- Default protocol: DSHOT300
- When use 1s battery and high KV 0702/0802 motors, should set startup power to 1100/1200
Onboard UART ExpressLRS 2.4GHz Receiver
- Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
- RF Frequency: 2.4GHz
- Antenna: enameled copper wire 31mm length
- Telemetry output Power: <12dBm
- Default firmware version: ExpressLRS V3.0.1
- Firmware target: HappyModel EP 2400 RX
- Could update firmware via ExpressLRS configurator
** If bound to radio but having trouble seeing stick movement in Betaflight, then you may need to turn off the "Model Match" factory setting in the ELRS web GUI.
Package Includes:
- 1x Mobula8 Frame
- 1x CrazyF4HD ELRS flight controller firmware target:BETAFLIGHTF4
- 4x EX1103 KV11000 brushless motor
- 1x Gemfan Hurricane 2023 tri-blade propellers(4cw+4ccw)
- 1x Canopy(DJI O3/Walksnail/HDZERO optional)
- 1x Screw driver
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.9 ★★★★★
Based on 19 reviews
Sort
Product Reviews
★★★★★ 1
NOt good... not great... horrible
Set name: Sublimation Printer
I’m thoroughly disappointed with the Brother Sublimation Printer and would not recommend it. Out of the box, the setup process was more complex than anticipated, with unclear instructions and frequent errors. The print quality was inconsistent, with colors often coming out dull or inaccurate, despite multiple attempts at calibration. I experienced frequent paper jams, which disrupted my workflow and wasted a lot of materials. The printer’s software is buggy and doesn’t integrate well with other design programs, making it frustrating to use. The connectivity options were unreliable, causing frequent disconnections and delays. Additionally, the printer is quite noisy during operation, which can be distracting and bothersome. The build quality feels flimsy and not as durable as I expected. The customer support experience was also poor, with slow response times and unhelpful solutions. I faced issues with ink usage, as the cartridges seemed to run out quickly, leading to higher operational costs. The sublimation prints didn’t have the sharp, vibrant quality I was hoping for, making my final products look less professional. The lack of clear troubleshooting guides added to the frustration. The printer’s design is bulky and takes up more space than I anticipated. Overall, this Brother Sublimation Printer has been a letdown in terms of performance, reliability, and ease of use. I regret investing in this product and would advise looking for alternatives.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2024
★★★★★ 4
Pretty good for the price.
Set name: Sublimation Printer
So far so good. I have been producing a fair amount of items to date. My only wish was that the colors were more vibrant with this printer and it's ink.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 27, 2025
★★★★★ 5
Inkjets have come a long way
Pattern Name: Printer, Style: ET-15000
Just a lot to like about this printer and nothing I don't like. Very capable for the price.
I do mostly black and white printing, rarely print photos. (This will supposedly do a credible job of photo printing too but I haven't tried it). If you want professional caliber photo printing, you probably want the Epson 8550 which is similar to this, a bit more expensive, but does 6 color printing. If you are doing more like every day business printing the 15000 might be a better choice because it's built more for speed.
The tank system means I can just replace the black because I use it a lot. The black ink tank is double size of the others and based on my experience so far, I think I'll easily get over a thousand pages on the standard-vivid setting which is very strong black but still relatively high speed printing. Given that the black ink bottles are under $30 I think the cost per page will be comparable to laser.
The booklet/pamphlet printing can be complicated to work out with layers of PDF software and the Epson printer driver. But once you work it through, it's super capable. I've printed a lot of 12 x 18 double-sided for booklets and the paper handling has been flawless. (It can duplex automatically for 8 1/2 x 11 but for other sizes you have to manually duplex, which you can do by printing back/front or even/odd.)
It's not as fast as a laser printer but it's pretty fast -- inkjets have improved so much.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
★★★★★ 5
Perfect Printer for My Small Business
Pattern Name: Printer, Style: ET-15000
I purchased the Epson ET-15000 for my crafting and apparel business and have been very pleased with its performance. The print quality is excellent, colors are vibrant, and the large ink tanks help save money over time. It handles larger print sizes with ease and has become an essential part of my workspace.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 3, 2026
★★★★★ 5
Nice large format printer which is what I needed
Pattern Name: Printer, Style: ET-15000
I make stained glass panels and needed a printer that I could make larger copies with. I also wanted one that I could manipulate my images with. This was my best option and I love the Eco-Tank printers. After reading the reviews I made sure to add a couple years of additional warranty for my peace of mind. Finding 13 x 19 paper that was affordable was a tough challenge. I found a bunch on FB marketplace and bought everything they had to offer.
This printer was very easy to set-up. I just followed the instructions and then followed what was on my computer screen. At first I thought I would have an issue connecting to Wi-Fi but when it failed on the computer, I was able to go to the printer and do it from the control panel - Easy peesey. I have used it several times since filling, charging, and installing and everything works as it should. My husband has an Eco-Tank printer and I've wanted one since he got his. I love that the ink will last a very long time and that it will be cost efficient. I am not overly interested in photo printing so this was the perfect choice for my needs.
The print quality is fairly good when comparing it to my old Canon and e that there are several paper trays and ways to make copies, especially the automatic feed and the larger scanner bed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 26, 2026
recommand products
End mills Solid carbide / Ø 12.000 mm h10 / Type N / DIN 6527K / FIRE
80.17
End mills Solid carbide / Ø 7.000 mm h10 / Type N / DIN 6527L / FIRE
48.97
End mills Solid carbide / Ø 3.500 mm h10 / Type N / DIN 6527L / bright
24.24
End mills Solid carbide / Ø 10.000 mm h10 / Type NH / DIN 6527L / FIRE
48.93
End mills Solid carbide / Ø 10.000 mm h10 / Type N / DIN 6527L / FIRE
34.91