SKU: 21399787227

Beton Ciré pakket | Kant & Klaar: 959. Velvet

Sale price$25.20 Regular price$28.00
Save 10%

Pay in installments of $7.00 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 2 - Aug 7

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Beton Ciré pakket | Kant & Klaar: 959. VelvetGa jij voor de mooiste afwerking? Dan ga jij voor de Kant & Klaar. Deze serie staat voor gemak met een kant & klare Beton Cir die na de primer direct aangebracht kan worden in twee lagen. Beide lagen haal je uit dezelfde emmer, dit heet het En pot systeem en maakt het aanbrengen extra gemakkelijk. Je gebruikt dus 500 gram per laag per m. Voor 1m in 2 lagen heb je dus 1kg nodig. Ter verduidelijking: bestel het aantal m dat je nodig hebt en wij sturen

Ga jij voor de mooiste afwerking? Dan ga jij voor de Kant & Klaar. Deze serie staat voor gemak met een kant & klare Beton Ciré die na de primer direct aangebracht kan worden in twee lagen. Beide lagen haal je uit dezelfde emmer, dit heet het Eén-pot-systeem en maakt het aanbrengen extra gemakkelijk. Je gebruikt dus 500 gram per laag per m². Voor 1m² in 2 lagen heb je dus 1kg nodig. 

Ter verduidelijking: bestel het aantal m² dat je nodig hebt en wij sturen de juiste hoeveelheid op voor beide lagen!

De normale primer is al inbegrepen in het pakket, deze hoef je niet apart te bestellen. Alleen als je tegels als ondergrond hebt bestel je Ardex R1C en korrelprimer erbij. 

Bestel altijd eerst kleurstalen

Om zeker te zijn van je kleurkeuze kun je bij ons gratis kleurstalen aanvragen. Je betaalt dan alleen verzendkosten. Onze kleurstalen worden gemaakt op mdf plaatjes van 10cm bij 8cm en hier zit in 2 lagen beton cire op incl. coating. Je kunt dus echt ervaren hoe de structuur, het eindresultaat en niet te vergeten de kleur is. 

Ter verduidelijking: de kleurstaal zelf is gratis, je betaalt alleen verzendkosten. Dit betreft 3,95 tot en met 4 stuks en daarboven tot en met 10 stuks 6,95 (dit is het maximum). De kleurstaal is een houten staal van 10cm bij 4cm. Wil je meer dan 10 stuks dan raden we aan in meerdere keren te bestellen. 

Heb je alle kleuren van de hele serie nodig? Bestel dan een kleurstalenbox. 

Waarom kleurstalen?

Let op: beeldschermkleuren kunnen afwijken van de daadwerkelijke kleuren. Ook lichtinval kan een kleur op de vloer en de sfeer in de ruimte voor een groot deel bepalen. Bestel daarom altijd eerst een gratis kleurstaal of een proefpakket.

Heb je een kleurstaal besteld, dan ontvang je een kortingscode thuis van 10% op alle producten van Betonstunter! Voordelig dus voor als je de echte bestelling gaat plaatsen.

Heb je al kleurstalen maar wil je het product eerst uitproberen?

Bestel dan een proefpakket. Een proefpakket bevat primer en beton cire voor 1m² in 2 lagen. Je kunt dus een stukje van 1m x 1m zelf proberen. Je krijgt het proefpakket op kleur gemengd. 

Creëer je eigen unieke betonlook

Of je nu een ruw of een gladder oppervlak met Beton Ciré wilt, met de Beton Ciré Kant & Klaar kan het beide! Je kunt de gladheid zelf bepalen door het te spanen en te schuren tot dat je het gewenste eindresultaat hebt. Hoe dan ook creëer je zelf het gewenste eindresultaat. Ook de tekening kun je voor een groot deel zelf bepalen, door kleinere spackmessen te gebruiken krijg je kleinere slagen in je structuur en dus een drukker uiterlijk. Gebruik je grotere spackmessen dan zullen de slagen groter en rustiger zijn. Over het algemeen is de structuur ook minder te zien bij lichtere kleuren dan bij donkere kleuren. 

Voordelen van Beton Ciré Kant & Klaar

Het is kant en klaar dus makkelijk aan te brengen. Beton Ciré Kant & Klaar is niet te onderscheiden van echt beton en geeft daardoor een prachtig betonlook effect. Het is hygiënisch: er treedt geen schimmelvorming op en er komt geen vuil in de naden.

Beton Ciré is vuilafstotend.

Het is erg onderhoudsvriendelijk: schoonmaken is geen probleem. Beton ciré kan op vrijwel elke oppervlakte aangebracht worden. Het kan een kleinere ruimte optisch groter doen lijken doordat je geen voegen hebt.

Beton Ciré toplaag/beschermlaag
Een oppervlak in beton is vrij poreus. Dit maakt dat het oppervlak niet volledig watervast is en er kunnen zich ook vuil en vetresten in nestelen. Als je een oppervlak in beton volledig waterdicht en onderhoudsvriendelijke wil maken, gebruik je onze Beton Ciré coating. Het maakt de poriën in het beton dicht en legt een beschermlaag over het beton heen. Daardoor kun je het makkelijk schoonhouden. Afnemen en afwassen is geen enkel probleem. In ruimtes die extra bescherming nodig hebben (zoals een douche of de vloer) adviseren wij 2 toplagen om je Beton Ciré te beschermen.

Welke producten heb ik nodig?

Voor het aanbrengen van de Beton Ciré Kant & Klaar ben je het volgende nodig:

  • Ardex R1C renovatiepleister (Alleen bij tegel ondergrond)
  • Korrelprimer (Alleen bij tegel ondergrond) 
  • Primer
  • Beton Ciré – Laag 1
  • Beton Ciré – Laag 2 
  • Coating - Laag 1
  • Coating - Laag 2 (afhankelijk van toepassing)

Benodigd gereedschap

  • Viltrollers (10 en/of 25cm) + rolbeugels (10 en/of 25cm) voor het aanbrengen van elke laag van de primer en de coating
  • Schone verfbakken of emmers voor de primer en de coating.
  • Speedmixer voor het mengen van de Beton Ciré en de coating (wel goed schoonmaken).
  • RVS spackmes voor het aanbrengen van de Beton Ciré. Wij adviseren klanten om een spackmes van 25cm te nemen, deze is het meest gangbaar.
  • Excentrisch roterende schuurmachine.
  • Schuurpapier korrel 80 of 120.
  • Zachte stoffer of een industriële stofzuiger met zachte borstelkop.
  • Optioneel: maatbeker voor het afwegen en/of aanmengen van de coating. 
  • Afplaktape (geel of paars afhankelijk van je ondergrond)
  • Stoffer en blik
  • Rolmaat voor het opmeten van je oppervlakte

Is je ondergrond van tegels?

Dan adviseren wij om Ardex R1C te gebruiken. Ardex R1C wordt gebruikt om tegels op wanden uit te vlakken. Zodat deze geschikt is voor de toepassing van onze beton cire. Ardex is speciaal ontwikkeld voor decoratieve afwerkingen en scheurt niet. Ardex R1C is daarbij snel droog en watervast, het is dus uitermate geschikt om je tegels van je badkamer mee uit te vlakken. 

Liever je klus laten uitbesteden?

Bij Betonstunter bieden we niet alleen hoogwaardige producten, maar ook deskundige ondersteuning bij het verwerken van je klus! Mocht je dus je klus liever laten uitbesteden aan een professional kunnen wij je helpen! Nieuwsgierig naar de mogelijkheden voor jouw project? Vraag nu vrijblijvend een prijsindicatie aan.

Wij bieden verwerking aan in zowel Nederland als België.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 21399787227

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 26 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Anthony Hope
Boise, US
★★★★★ 5
Simply delightful espresso machine
Color: A-Silver, Style: Button
I am not one to write reviews very often, and I am not a coffee snob obsessing over everything to do with the perfect espresso shot. I do have lots to say about this machine though. My previous Mr Coffee Cafe Barista machine died after many years and I wanted something that would allow me to steam my own milk instead of it being done for me. I also didn’t want to spend more than $150 either as my circumstances are not great right now… Anyway, after reading many reviews on similar machines, I settled on this beaut. I am more than happy with my purchase! The machine is small and takes up half the space my old machine did, which earns high spousal approval. The all stainless steel body looks good and durable and wipes down easily. It looks good on the countertop. It heats up fast for a thermoblock design, and while the water capacity in the tank isn’t the greatest, a full tank is enough to pull two espresso shots, steam two jugs of milk, plus allows for preheating the group head and portafilter and flushing everything afterwards. The machine pulls a pretty decent shot with pre-ground espresso and leaves a hard puck after extraction, something I always had issues with on my old machine which would always leave a soupy mess. I do weigh my dose (13 grams), use a WDT needle tool, distributor, tamper and puck screen. While I do not have control over everything, you can set the volume of water dispensed for each of the buttons on the panel. The single shot button is set at 30 milliliters. I can’t get a full 15 grams into the portafilter for a true 1:2 ratio but it’s close enough. The milk frother is fast and steams the milk in about a minute and actually produces some good results. The wand seems durable and the rubber grip is well placed so you don’t scald your fingers. This does a great job for frothy cappuccinos or silky lattes. The pump is not loud either which is good for a machine at this price point. Please follow the instructions to prep the machine when you first set it up. Run a few shots through the machine before you start using it to remove any trace particles in the water lines and pump. And plastic smell from the water tank will be removed by doing this. For a basic espresso machine, this is a good buy. It seems to be well made, and it suits my present financial circumstances. Sure, I wouldn’t mind a more mainstream brand and probably a better quality machine, but for the money, don’t hesitate in buying this machine. I got mine for $129 in early 2025 and I’ve seen this at $99 before over the holidays. It’s a simply delightful espresso machine that I’m glad to have.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 18, 2025
J
Verified Purchase
J
Belleville, US
★★★★★ 5
Excellent machine
Color: A-Silver, Style: Button
Been using this machine every day for over 3 months. It works great and makes a fantastic cup of espresso. Some observations: - Use with a conical grinder. Small changes to the size of the grind makes a significant change to the pressure that can be generated (smaller grind = higher pressure). This results in significant changes to the flavor of the espresso. - The screen cups have a small notch/bump in them to keep them from falling out of the handle when dumping the grinds. They can only be inserted/removed from the handle in one way. I replaced them with ones without the notch (my preference). - If you allow it to run out of water while running, you have to release the internal pressure by opening the steamer wand valve (put a cup under the wand). The machine is not broken - don't panic. - The pour volume for a single and double can be adjusted (read the manual) but the minimum pour size is a little large in my opinion. The pour can be stopped manually but you have to be monitoring the pour to turn it off. - There is some vibration in some conditions that can cause the cup to wander during the pour. So it is best to keep an eye on the pour in any case (see comment above)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 3, 2026
S
Verified Purchase
SBB
Pawtucket, US
★★★★★ 5
Cheaper than Breville Bambino and probably better
Color: A-Silver, Style: Button
I have a Breville Bambino but bought this for my parent’s house as I was hosting a party there for a week. In comparison to the Bambino, this Casabrew produces more espresso for a double with more foam with less grounds (15g for Casabrew vs 18g for Bambino). Although I had to use the hot water function repeatedly to decrease the temperature and prevent over heating, I was able to use the milk frother function for 7 drinks in a row without any issue. The machine takes up more room vertically and the materials seem more solid than the Breville and at a lower price. I am very happy with this product and would’ve been happy with it over the Breville had I known how good it was. It was easy to set up, brew time was quick, temperature good without having to warm up the machine like it suggested. No leakage at all. Excellent product. PS. If noise level is important to you, the Breville is less noisy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 22, 2026
H
Verified Purchase
Hunterrobe
Louisville, US
★★★★★ 4
Nice espresso
Color: A-Silver, Style: Button, Color: A-Silver, Style: Button
This little machine does a pretty good job at making your cup of espresso. It does extract a lot of flavor out of your coffee. The milk steamer does work really good and makes a great hot froth for you espresso. The size is great as well since it has such a small footprint. The style is wonderful looking and makes it look like an expensive machine. It does have some issues as far as how much you will get out of an extraction. But I am comparing it to a friend's that is much more expensive. Another issue is once you use the steamer the machine get to hot. You will then need to either wait until it cools off to make another shot of espresso, or run the steamer to release the heat. One other thing, the grounds are not pressed into a hard puck after an extraction. They will be a little loose and still wet. Be careful when you empty the grounds since they are wet. It can splash a lot trying to empty them. The plastic press it comes with is very weak. You need the metal one with some weight. The machine is decent and will save you a lot in the long run compared to buying it from a shop every day.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 22, 2026
F
Verified Purchase
Frankie
Alexandria, US
★★★★★ 5
Excellent espresso, shocked how good this thing is for the price.
Color: A-Silver, Style: Button
I thought the barrier to entry into espresso would cost more. I assumed the machines under $500 would be absolute junk. I still have a $600 unit in my save for later that I was going to "graduate" to if it turned out I'm into espresso as much as I thought I'd be. Decided to get my feet wet with this unit fully expecting to eventually buy the $600 one I had my eyes on. Turns out, I could not possibly fathom what I'd need to replace this thing for? It does exactly as it should. Maybe the pressure isn't perfect or the temps are not 100% stable like a professional grade machine, but this makes a damn good cup of double shot espresso. The steamer wand works well. I will use this thing until it doesn't espresso no more. One thing I had to get used to is the order of operation: 1. Get the steamer going by spraying water/steam mix into your cup, when it's fully steam, use your chilled milk pitcher to get your steamed milk, 2. Clean off the steam wand, turn off the steam button, then open up the steamer again until it spits out nothing but hot water (no steam) because this cools down the machine's internals, if you try to brew a cup of espresso before this step, it will not work, it must cool down and the only way to do that is to send water through the steamer, 3. Brew a single cup with no grinds, just pass water through to pre-heat everything, 4. Load the grinds and make your actual espresso. If you're on the fence, don't hesitate, this thing is amazing for the price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 7, 2026

recommand products